Level Rise

Japan Looping SolutionsSKU: jpls-levelrise

Price:
Sale price$54.99

Payment Method

  • PayPal
  • Credit Card: Visa, Master, AMEX, JCB
  • Apple Pay
  • Google Pay
  • Shop Pay

Shipping Method

  • Small Packet / EMS (Japan Post)
  • FedEx

Import Tax / Customs:

All customers outside of Japan are subject to be levied import tax or customs fees. Especially, EU, Israel, and Brazil customers!

You are responsible for paying the import tax and duties levied by YOUR country. This amount is decided by your government, so we cannot tell you how much they will charge in advance.
Please be aware of this potential cost. We cannot accept any returns or cancellations due to issues with Tax and Duties. For more details, please check your government customs web site. It is completely out of our control and we cannot do anything about these kinds of fees.

For more information on payment and shipping, click here

If you have any other questions, please contact us using this contact form.

ll yo-yos have passed the manufacturer's inspection. Different manufacturers have different standards for product quality. Basically, products that can be used normally are within the product specifications.

Examples of possible initial defects : If you notice any of the following symptoms immediately after opening the product, it may be due to an initial defect.

  • (Bind model only) The bearing barely turns even when flicked with a finger.
  • Even after calming the vibrations with a rotating middle finger, the yo-yo still vibrates so much that it appears to change shape.
  • Parts that should have been installed (bearings/pads) are not installed

Examples of items that are not considered initial defects

  • Damage to the package
  • Color image difference
  • Bearing noises after playing a few times
  • A yo-yo that was delivered in a properly assembled state, but after being disassembled, could no longer be assembled
  • Scratches and paint chips inside the bearing area
  • The color unevenness of the yo-yo is not noticeable from a distance.
  • Paint chipping that is not visible from a distance
  • Scratches on the yo-yo that are not visible from a distance and are barely noticeable when touched with your fingers

For other competitive yo-yos, please click here.

Description

‌Japan Looping Solutions - Level Rise

This metal-capped design excels at long stable sleeps and all styles of looping tricks!

**This yo-yo's construction, including the way of assembling, disassembling and adjusting its settings are very different from a normal yo-yo. NOT recommended for beginners!**

An extremely rare find! This new looping yo-yo from JPLS employs METAL side caps! Essentially, it is a Loop Up with a metal side cap, which greatly increases the force of its spin. That unique weight balance gives a boost to both sleeper tricks and looping play as well, improving stability greatly. Especially during looping practice, the Level Rise is very steady and it's easy to stay on course with beautiful orbits and overall improving your looping experience. The added sleep is also impressive, and we expect a lot of new trick development to come on all fronts of looping trick styles.

Assembly and gap adjustment methods are identical to the Loop Up.

*Adjusting the gap width requires a 6mm wrench (sold separately)

*Because the possibility of the yo-yo coming apart during play is increased by the added momentum of the metal caps, we recommend using the Disassembly-proof Nut Set (sold separately)

*During adjustment it's possibly to accidentally cross-thread or overtighten, damaging the axle threading. This greatly reduces the solidity of the assembly and increases the likelihood of accidental disassembly in mid-air. If this happens, we recommend replacing the axle with a new one.

>>How to Adjust the gap

Complete Disassembly Instructions

  1. Using the included suction cup, remove both side caps.
  2. Using the 6mm wrench (sold separately), remove the nut.
  3. Unscrew the yo-yo like a normal looping yo-yo and it will all come apart.

Reassembly Instructions

  1. Note the asymmetry of the Loop Up Axle, the long side is for the axle nut.
  2. Insert the short side of the axle into one half of the body, screwing it into the inner side with the starburst response area
  3. Insert the bearing, sandwiched between two spacers, onto the axle.
  4. Take the other half of the body, and screw it onto the long side of the axle so that the starburst response areas are facing each other. If you tighten this all the way, the starburst response areas will touch, so stop just before you get there. Adjust the gap to your desired setting.
  5. On the long end of the axle that you just screwed into the body, use the 6mm wrench to tighten down the nut to fix the gap.
  6. Like a normal yo-yo, lightly tighten things down and re-install the side caps.

How to Adjust Gap Width

  1. These instructions start from a fully assembled Loop Up or Level Rise.
  2. Use the suction cup to remove the side cap from the side with the gap adjustment nut.
  3. Loosen the gap adjustment nut (but not enough for it to come off).
  4. Screw the side of the yo-yo with the gap adjustment nut clockwise to tighten, or counter-clockwise to widen the gap.
  5. Re-tighten the gap adjustment nut to fix the gap, and test the new setting.
  6. Repeat these steps, adjusting if necessary, to find the perfect settings.
  7. Re-install the side caps.

>>How To Disassemble and Reassemble the Loop Up



>>How To Adjust Gap Width on the Loop Up



>>How To Use the Loop Up Disassembly-proof Nut Set

More Information

ブランドJapan Looping Solutions
シリーズ

nothing special

シグネイチャー

-

スタイル

Looping Trick (2A)

対象年齢

No particular indication

ブランド国

Japan

発売年

2020

重さ (g)

51.1

直径 (mm)

58.16

本体幅 (mm)

33.1

トラピーズ有効幅 (mm)

11

ボディ形状

Normal shape

ボディ素材

Plastic (polycarbonate/ABS, etc.)

リム種類・素材

none

ベアリング・軸の種類

ball bearing

ベアリングサイズ

Size E (Raider)

レスポンスシステム(サイズ)

Starburst

アクセル(軸)

-

分解

Possible

スペーサー

Cover Type

バインド

Normal pullback

表面加工

No smooth finish

メンテナンス

Oil injection


→スペック表の見方はこちら

 
BrandJapan Looping Solutions
Series

nothing special

Signature

-

Style

Looping Trick (2A)

age

No particular indication

Designed in

Japan

Release Year

2020

Weight (g)

51.1

Diameter (mm)

58.16

Width (mm)

33.1

Trapeze Width (mm)

11

Body Shape

Normal shape

Body Material

Plastic (polycarbonate/ABS, etc.)

Rim

none

Bearing Type

ball bearing

Bearing Size

Size E (Raider)

Response System

Starburst

Axle

-

Twist-apart

Possible

Spacer

Cover Type

Bind

Normal pullback

Surface

No smooth finish

Maintenance

Oil injection

Most popular items among buyers

Recently Viewed Products