CP-16 Azumi Techno Bearing Remover (Size D)
Manufacturer's Comment
This is a bearing remover supplied by Tokai Azumi Techno exclusively for size D bearings. Although Sturm Panzer supplies the “CP-14 Size D/C Bearing Remover,” we are pleased to offer the bearing remover produced in small quantities by Azumi Techno for more reliable removal of size D bearings.
Considering the current demand for size D bearing removers in 2024, we are unable to meet the minimum order quantity required for mass production, so we have to set the price as a small-lot limited production item. Since it is currently not feasible to continue making the product in small lots, sales will cease as soon as the stock runs out, unless demand increases enough to warrant mass production.
How to use:
1. Disassemble your yo-yo and if the side with the bearing has the axle installed, remove it prior to using the tool. Some models make it difficult to remove the axle, please check your yo-yo's documentation before attempting this.
2. Lightly unscrew the screw-cap on the end of the remover, then insert the other end into the bearing.
3. Tighten the screw-cap until the tool tightly grips the bearing, then rock the bearing remover to loosen the seating and separate it from the yo-yo body.
4. Unscrew the screw-cap and take the bearing off the remover.
Check the Instagram video below for a demonstration of this tool in use.
*This product is made for use with size D bearings only
*This product makes removing bearings easier, but is no guarantee and depending on the condition of the yo-yo and bearing there may be situations where even this remover will not work.
