All customers outside of Japan are subject to be levied import tax or customs fees. Especially, EU, Israel, and Brazil customers!
You are responsible for paying the import tax and duties levied by YOUR country. This amount is decided by your government, so we cannot tell you how much they will charge in advance. Please be aware of this potential cost. We cannot accept any returns or cancellations due to issues with Tax and Duties. For more details, please check your government customs web site. It is completely out of our control and we cannot do anything about these kinds of fees.
If you have any other questions,please contact us usingthis contact form.
All yo-yos have passed the manufacturer's quality inspection. Quality standards vary by manufacturer. Basically, products that can be used normally are within product specifications.
Examples of possible initial defects
if the following symptoms occur immediately after opening, they may be initial defects:
(Bind models only) The bearing barely rotates even when flicked with a finger.
Even after dampening vibrations with a finger during play, the yo-yo vibrates so much that its shape appears distorted.
Parts that should be installed (bearings, pads) are not installed.
Examples that do not constitute initial defects
Package damage
Color differences from expectations
Bearing noise or bind model return issues that occur after even a few plays
Yo-yos that arrived properly assembled but cannot be reassembled after disassembly
Scratches on the inside of the bearing area, paint chips
Color variations on the yo-yo that are not noticeable from a distance
Paint chips that are not noticeable from a distance
Scratches on the yo-yo that are not noticeable from a distance and barely detectable by touch
Minor rust on bearing surfaces of models that come pre-strung in the package (minor external rust has almost no impact on performance)
We faced a situation where it was difficult to make yoyo for a while because of soaring aluminumprices and power shortages.
Even if the situation was difficult, we thought we should enjoy yo yo cheaply but sufficiently.
With the success of SABERTRI CK, this model is the first 1A type model manufactured for the purpose of competition by boldly improving EASYTRICK's hub system.
It was produced so that there is no problem even if players actually use it, and the shim parts were made cheaply so that playe rs could adjust the gap.
The hard hub that EASYTRICK had was also developed with a smooth hub so that it could easily fall off by hand without a bearing remover tool.
1A hub is longer than EASYTRICK's HUB. Please be careful:)
Compared to metal yo yo, it has a perfect sleep time. I t has less vibration than the usual 3D 1A yo yo.
This is because of the form of yo yo that we ma de by changing our ideas. It contains our own secrets that cannot be produced by the general 3d printing method.
It is a round type with the goal of balance and stability.
** Precautions
When making 3D yo yo, ther e is a sharp part on the bottom as a basic specification.
If you are practicing rough style tricks, please polish the sharp part with soft sandpaper so that you don't get hurt.
BEARING SEAT is not made of metal, so don't lock it hard and lock it sof tly with your palm.
Like when locking a metal yo yo, it can break if you apply force, so be careful.
The hub of the bearing sheet is thick, so make sure to remove the bearing shield before installing it.