All in One Paste

This all-in-one bearing maintenance lube combines the ingredients of dry coating and string trick oil into a cream.

Put some parts cleaner or similar into a cleaning bottle, add a small amount of it and dissolve it, then add the cleaned bearings and shake.

Remove the bearing from the bottle and rotate it to evaporate the parts cleaner, leaving behind a dry coating and oil film components to protect the bearing.

[How to use]

1. Degreasing and cleaning of bearings Remove oil, dirt, etc. adhering to the inside of the bearings.
   *Even if the bearings are new, try cleaning them if necessary.
   
   
2. Put some parts cleaner or similar into an application cleaning bottle, pour a small amount into it and dissolve it, then add the cleaned bearings and shake.
   Remove the bearing from the jar and flick the bearing between your fingers to ensure it is evenly seated inside the bearing (repeat this for a few minutes).
   As the volatile components disappear and only the lubricating components remain, the rotation time will gradually increase.
   The treatment is complete if the smoothness and sound of the rotation when you flick it with your finger changes. Depending on the condition of the bearing, there may be little change or it may spin longer when dry, but if it starts to spin better than it did immediately after application, the ingredients will gradually become ingrained in the yo-yo as you use it.
   
   It will be more effective if you remove the bearing shields, but it will still be effective even if you don't remove them.
   
   
3. Maintenance: Basically, the effect will continue until the bearings start to malfunction due to foreign matter getting into them. In that case, please clean the bearings again and repeat the above steps.
   
   [Notes]

• If you apply too much, the liquid may splash out when you rotate the device. Please be careful as it is difficult to remove if it gets on clothing or other fabric products.
  
• Depending on how the load is applied to the bearings, the bearings may be damaged. Please carefully consider the operating environment before use.
  
• The volatile components include alcohol, so please store and handle in an environment away from fire. Close the cap immediately after use.
• If you apply it and then store it for a long time without using it, the ingredients may harden and the rotation may become sluggish. It may become smoother with use, but if it does not, wash it and apply it again.
• White powder may appear, but this is part of the composition. It becomes a coating as the bearing rotates.
• Depending on the storage conditions, the liquid inside may evaporate. Avoid high temperatures and store in a cool, dark place.